SJCAM C100 Thumb Camera Firmware Upgrade – v1.1.1 Download & Changelog (Not for C100plus)

 

SJCAM C100 Thumb Camera v1.1.1 Firmware download link:

DOWNLOAD V1.1.1

To upgrade the firmware properly, follow the steps carefully:

1.Power the camera off.
2.Remove the MicroSD card from the camera.
3.Reformat the MicroSD card using the FAT32 file format on your computer. This is a must, the camera won’t update if you don’t format the card under FAT32.
4.Copy the attached firmware ‘bin’ file into the memory card, please keep the firmware ‘bin’ file’s name.
5.Reinsert the SD card to your camera.
6.Connect the camera to the wall charger, the camera will be upgraded automatically. If your battery was full, you do not need to connect the camera with charger.
7.After the firmware update was completed, please delete the ‘bin’ file, otherwise, the camera will install the firmware every time you turn it on

SJCAM C100 Thumb Camera v1.1.1 Changelog:

20200805
V1.1.1
1. Solve the problem that the red light flashes abnormally when the file name in the card is modified and then inserted into the machine.
20200729
V1.1.0
1. Modify the version number
2. Modify the time-lapse video mode, restore the default settings, and then connect to the app, the display mode on the app is video mode, but the red light on the machine is always on, and the blue and green light should be always on
20200528.
After the modified image flip function is turned on, the photo file does not turn over.

20200527.
Add 9034 image flip function.

20200526.
Update IQ (adjust AWB).

20200525.
V1.0.9:
1. Modify that when there is no card into PCCAM, the red light is off and the blue light is always on. At this time, disconnect the USB camera and shut down.
2. Modify the delayed recording time. The problem can not be saved after shutdown.
3. Long press the power button to turn on it is currently the shortest.

20200522.
V1.0.8:
1. Modify the indicator definition (see C100 indicator definition.xlsx)
2. Update the latest IQ.
3. Modify the abnormal problem of PC CAM 1080P image.
4. Modify the delayed recording time and resolution can not restore the default problem.

20200520.
Cancel the photo mode on the camera and change to press the power button twice to switch WiFi.

20200518.
V1.0.8:
1. Added 9033 continuous shooting resolution command to separate continuous shooting resolution from normal camera resolution.
2. Solve the problem that the WiFi stream preview watermark is affected by the video watermark switch in the settings menu (remove the time watermark of the WiFi preview stream for recording and taking photos).
3. Solve the problem of setting WDR to on, then restoring the factory settings, and reconnecting to the app, the WDR is still on in the menu.
4. Solve the problem of duplicate serial numbers of photo files.
5. Modification to support 64G 128G kcal.
6. Solve the problem that WiFi cannot be turned on or off when the power button is pressed three times in camera mode.
7. Modify the green light to flash when WiFi is turned on.
8. Optimize the smooth transition of the three-color lights when the power button is pressed twice to switch mode.
9. Modify the NOVATEK related characters in the photo properties to SJCAM and C100.
10. The boot recording function is turned off by default.
11. It does not automatically turn on when the usb is plugged in for charging.
12. Solve the problem that when the automatic shutdown is turned on, it will automatically shut down during recording.

20200509.
V1.0.7:
1. Change the photo resolution to 16:9. (Because the sensor is 16:9, the angle will not be lost if you change it)
2. Remove the firmware function automatically after upgrading.
3. Appropriately increase the RTSPWiFi streaming code rate. (Solve the problem of RTSP streaming stuck)
4. Video The resolution of the camera is set to the highest by default.

20200508.
1. Update the latest IQ effect.
2. Solve the problem that thumbnails cannot be obtained in portrait mode under WiFi.
3. Solve the problem that the photo size is 5M resolution display error.

20200331.
Added 9032 command to individually set the recording time in vehicle mode.
20200326.
Add portrait mode, etc.

20191220.
App adapted to the new interface of SJCAM

20191218.
Adapt APP

20191217.
V1.0.3:
Added continuous shooting, interval video, time-delay video, and timed camera functions on the APP.
The default is H265 and so on.

20191216.
Adapt to SJCAM APP.

20191214.
V1.0.1
Modify the definition as follows:
Button definition:
Long press: power on and off.
Short press: start and stop recording.
Short press twice in succession: take a photo.
Short press three times in a row: switch WiFi.
Indicator light definition:
Blue light (WiFi light):
When WiFi is turned on, it flashes quickly, after connecting to WiFi, it is always on, and other states are off.
Red light (work light):
When recording, it flashes slowly once a second. Turns off when recording stops.
Flashes 3 times quickly when taking pictures.
Green light (standby light):
When the camera is abnormal (no card, abnormal card), it flashes quickly, and it stays on during standby.